Skip to content
Rexgear_Itech IT6513 Wide-Range High-Power DC Power Supply 150V 30A 1200W
Rexgear_Itech IT6513 Wide-Range High-Power DC Power Supply 150V 30A 1200W
Rexgear_Itech IT6513 Wide-Range High-Power DC Power Supply 150V 30A 1200W
Rexgear_Itech IT6513 Wide-Range High-Power DC Power Supply 150V 30A 1200W

ITECH IT6513 Wide-Range High-Power DC Power Supply 150V 30A 1200W

Overcome the Toughest High Power Test Challenges

The IT6500 series offers a full-featured high-performance power test solution. With fast response these DC power supplies provide users with a new level of power supply performance. From 800W to 30 kW, the whole series include more than 100 models. The maximum output voltage and current is up to 1000 V and 1200 A respectively. With its auto-ranging capability, it also has a super wide range of voltage and current applications. Users can choose the power supply that fits their testing requirements perfectly. In combination with the IT-E501 power dissipater unit, the current sinking capacity of IT6500C can be 100%, 200%, 300% and the power sinking up to 300% of the Sourcing capability. As a high-speed two-quadrant power supply, IT6500C (1800 W to 30 kW) series has a priority function so as to realize high-speed current transition between power supply mode and electronic load mode, to achieve fast switching between sourcing and sinking current, even can achieve seamless switching under certain conditions. IT6512, IT6513 and IT6500C series power supplies provide built-in DIN40839 and ISO-16750-2 testing curves, support solar panel I-V curve simulation function.

Choose the Right Power Supply that Fits Your Test Requirement

IT6502D / IT6512 / IT6512A / IT6513 / IT6513A Good performance and compact size, designed for general testing in R&D and production.
IT6500C series Fast switching between quadrants, even seamless switching can be achieved under certain conditions, multi-functional and fast response. These power supplies are designed for continuous source and sink testing requirements. Such as automobile electronics, solar panel IV simulation, DC motors, batteries, etc.
IT6500D series High performance with stable output, designed for automobile, green energy, high speed testing, high-power testing, etc.

    Ordering Info

    800W IT6502D 80V/60A/800W
    800W IT6512/A 80V/60A/1200W IT6513/A 150V/30A/1200W
    800W IT6512C/D 80V/120A/1800W IT6513C/D 200V/60A/1800WIT6514C/D 360V/30A/1800WIT6515C/D 500V/20A/1800WIT6516C/D 750V/15A/1800WIT6517C/D 1000V/10A/1800W
    800W IT6522C/D 80V/120A/3kWIT6523C/D 200V/60A/3kWIT6524C/D 360V/30A/3kWIT6525C/D 500V/20A/3kWIT6526C/D 750V/15A/3kWIT6527C/D 1000V/10A/3kW
    800W IT6532C/D 80V/240A/6kWIT6533C/D 200V/120A/6kWIT6534C/D 360V/60A/6kWIT6535C/D 500V/40A/6kWIT6536C/D 750V/30A/6kWIT6537C/D 1000V/20A/6kW
    9kWIT6542C/D 80V/360A/9kWIT6543C/D 200V/180A/9kWIT6544C/D 360V/90A/9kWIT6545C/D 500V/60A/9kWIT6546C/D 750V/45A/9kWIT6547C/D 1000V/30A/9kW
    12kW IT6552C/D 80V/480A/12kWIT6553C/D 200V/240A/12kWIT6554C/D 360V/120A/12kWIT6555C/D 500V/80A/12kWIT6556C/D 750V/60A/12kWIT6557C/D 1000V/40A/12kW
    15kWIT6562C/D 80V/600A/15kWIT6563C/D 200V/300A/15kWIT6564C/D 360V/150A/15kWIT6565C/D 500V/100A/15kWIT6566C/D 750V/75A/15kWIT6567C/D 1000V/50A/15kW
    21kW IT6572C/D 80V/840A/21kWIT6573C/D 200V/420A/21kWIT6574C/D 360V/210A/21kWIT6575C/D 500V/140A/21kWIT6576C/D 750V/105A/21kWIT6577C/D 1000V/70A/21kW
    24kW IT6582C/D 80V/960A/24kWIT6583C/D 200V/480A/24kWIT6584C/D 360V/240A/24kWIT6585C/D 500V/160A/24kWIT6586C/D 750V/120A/24kWIT6587C/D 1000V/80A/24kW
    30kW IT6592C 80V/1200A/30kWIT6593C/D 200V/600A/30kWIT6594C/D 360V300A/30kWIT6595C/D 500V/200A/30kWIT6596C/D 750V/150A/30kWIT6597C/D 1000V/100A/30kW

      Features

      • Support multiple power supplies paralleling in Master-Slave mode and ensures each power supply equally shares the load current. Extension capacity is up to 30kW output
      • Support up & down speed independently setting in different operation modes (Power supply: CV/CC/CP modes, Electronic load: CC/CP modes)
      • Adjustable rising and falling time
      • Two-quadrant current output, fast switching between quadrants - seamless switching, suitable for battery rapid charging/discharging test *1*3*5
      • Combined with IT-E501 power dissipater unit, can meet discharge test demand up to 90kW *1
      • Built-in DIN 40839, ISO-16750-2, SAEJ1113-11, LV124 and ISO2184 standard voltage curve for automobile power net *2
      • Solar panel I-V curve simulation function *4
      • LIST mode programming
      • Variable output impendence function *1
      • Low ripple and low noise
      • High resolution and high accuracy
      • Support multiple protections (Power Supply: OVP,OCP,OPP; Electronic Load: OCP,OPP,OTP, Vsense Reverse protection, turn-off protection, input under voltage protection
      • Remote sense function
      • Analog control interfaces
      • Built-in USB/RS232/CAN/GPIB/LAN interfaces
      • *1 Limit IT6500C series have this function
        *2 Limit IT6500C series have this function, IT6512 and IT6513 are built-in DIN 40839, ISO-16750-2
        *3 To achieve perfect battery charge & discharge function, please purchase IT9320 charge & discharge test system software
        *4 Optional SAS1000 software
        *5 Fast switching can be achieved under certain conditions, seamless switching function is unable to realize

      Seamless Current Switching Between Two Quadrants

      IT6500 series two-quadrant power supply is not simply a combination of a power supply and electronic load, but it is a continuous source and load. For traditional two-quadrant power supply, there will be a short jump and discontinuity across positive and negative currents. As a high-speed two-quadrant power supply, IT6500C (1800W-30KW) series has Loop-Mode function so as to realize high-speed current transition between power supply mode and electronic load mode, to achieve fast switching between sourcing and sinking current,even can achieve seamless switching under certain conditions, thus avoiding overshoot of voltage or current. That enables it to be widely used in energy storage device testing, such as batteries, battery encapsulation and battery protection panel etc.

      With the Power Dissipater Unit, Loading Capability Is Expanded

      IT6500C series can be used as both a power supply and an electronic load. It greatly enlarges the current sinking range of the power supplies. It enables sinking of current and power, thus it can be applied to applications requiring fast current sink test and batteries charging/discharging test. Each IT-E500 series power dissipater unit provides up to 3kW power sinking capability for the IT6500C series power supply. To meet higher power discharging test demand, multiple power dissipater units can be paralleled. The IT-E500 series power dissipater unit can extend the current sinking capability to 100%, 200%, 300% of the source range and the power sinking capability up to 300% of the Power sourcing capability. (Max. Power sink is 90kW). Meeting demanding requirements of high power discharging test.

      Fast Curve Changing Without Overshoot CC & CV Priority Function

      To conquer the demanding testing requirements existing for a long time in various applications, ITECH developed an innovative industry-leading CV & CC priority concept. The IT6500 is available for high-speed test applications with-out overshoot. Users can choose the desired output mode. Voltage high-speed mode or current no overshoot mode by choosing the loop response speed and loop operation mode. It is suitable for high-power integrated circuit test, charging / discharging test, military, solar array simulation and the transient simulation / characteristic of automotive electronics.

      EV Regenerative Braking Simulation

      For practical electric vehicle (EV) battery test, the ultra-realistic simulation of regenerative braking current is necessary, the whole test should be finished within 10ms. So the simulation result depends on the response speed of the relating testing device.

      1. Traditional solution: Adopt two single units, such as DC Power Supply + Electronic Load, which is of complex configuration, low efficiency and thus can’t meet the testing requirements.

      2. ITECH solution: IT6500C provides fast and seamless switching across current outputting and sinking, combined with IT-E500 power dissipater units, IT6500C can meet the testing requirements easily. It is an ideal solution for EV braking current’s regenerative battery test.

      Now, Here’s the Technical Bit…Such As Rise Time etc.

      IT6500 Series Product Catalog & Datasheet

      You Need to Be a Registered Customer to Download

      Installation Guide
      Communication Protocol
      Programming Guide
      Application Driver
      Control Software
      LabVIEW Driver
      LabVIEW Examples
      Fuel Cell Simulation Software
      Battery Module, Pack Test Software
      Battery Simulator Software
      Solar Array IV Curve Simulator
      Demo Keys

      Use by: