IT6700 series power supplies are the most economical power supplies, they have the widest voltage and current utilization, one power supply can replace multiple power supplies, widely used in various testing occasions. With the capacity of 100W, voltage output of 60V, current output of 5A, they can control the change rates of the voltage and current automatically. The power ratio can be up to 3 times. For instance, One IT6720 can substitute previous 60V*1.6A/32/*3A/20V*5A 3 kinds of models to save your cost.
- The most economical high performance completely digital-control power supplies
- 10mV/1mA high accuracy and resolution
- Lower noise and ripple
- CV/CC modes
- Minimum size to save space
- LED display
- OCP/OVP/OTP protection
- Full scale 60V/5A,resolution 10mV/1mA,no need to switch
- On/off controlling
Widest voltage and current utilization
IT6700 series can control voltage and current automaticly.The power ratio can be up to 3 times.For instance,one IT6720 can subsitute previous 60V*1.6A/32/*3A/20V*5A 3 kinds of models to save your cost.
Setting the voltage
Press to light up to the voltage setup indicator B.
It means IT6720 is in voltage set mode, shown as fig 1.
Press light up the voltage setup indicator
Now the voltage will rise/decline 1V once you rotary
the knob . Set the voltage to 12V.
Setting the current
Press To light up the current setup indicator A.
IT6720 is in current set mode, shown as fig 1.
Press to adjust the setup indicator to .
Now the current will rise/decline 1V once you rotary
the knob . Set the current to 4A.
Press to enable the IT6720 output. Voltages
and current settings will be wink for three seconds,
and after that , the display value of numerical
display value from the set value to actual measured
voltage and current value. Power lights will be
turned off which means the power is in output
state. Press again, you will shut power