Skip to content
Rexgear_Preen AFV-P-600B High Performance Programmable AC Power Source 600VA 310VAC 40-500Hz
Rexgear_Preen AFV-P-600B High Performance Programmable AC Power Source 600VA 310VAC 40-500Hz

Preen AFV-P-600B High Performance Programmable AC Power Source 600VA 310VAC 40-500Hz

Preen's AFV series is a programmable AC power supply, provides complete output voltage and output frequency to achieve various types of industrial requirements. Additionally, the AFV series provides programmable features, such as STEP feature and GRADUAL feature, which are ideal for R&D and compliance test.

AFV-P Series is a programmable AC power source with DC output and precision measurement. This compact power source provides clean power with THD less than 0.3% at 50/60 Hz and it delivers output voltage of 0-310 V and frequency of 40-500Hz (opt. 15-1000 Hz). It is ideal for commercial, defense and aerospace test applications from quality assurance, design verification, ATE to mass production.

With the advanced SPWM and DDS waveform technology, the AFV series provides high quality and stable output with output level up to 2000kVA. The AFV series adopts the touch screen to support user operation, which provides impressive users experience while operating the product. Users are allowed to remotely control the product via the standard interface: RS485 or the optional interface: RS232/GPIB. Additionally, the AFV series provides complete product protection, such as OVP, UVP, OCP, OPP, OTP and short circuit protection, and the product will immediately alarm users and stop the product output while the product protection is enabled.

Key Features

  • 9 Times Inrush Capacity: Ideal for motorized loads with heavy starting torques
  • Power Line Disturbance Simulation: For compliance tests of IEC-61000-4-11 / 14 / 28 etc.
  • Adjustable Phase Angle: High control frequencies and wide dynamic control range
  • Compact and high power density: 600VA to 2500VA is only 2U and 5000VA is 4U.
  • AC source with DC output: extend the applications to DC testing.
  • Wide output voltage of 0-310V and output frequency of 15-1000Hz.
  • THD is only under 0.3 % when output power is under 100 Hz.
  • Ideal for inrush current : capable to deliver up to 4.5 times of peak current.
  • Start/End phase angle: users can define the start and end phase angle from 0° to 359°.
  • Current foldback feature: have output current maintain constant based on the load which output voltage varies.
  • STEP and RAMP function: ideal for voltage and frequency variation tests and effectively reduces the inrush current during motor startup.
  • TRANSIENT generation provides users an easy setup for power line disturbance (PLD) simulation.
  • Users can quickly set and view the parameters via 5 inches touch panel or rotary knob, which provides an easy operation and measurement display.
  • Free control software and LabVIEW driver: allow users to easily program and remote control.
  • High slew rate: less than 300 µs from 0~90% output voltage.

Interfaces

  • Standard: 
  • Ethernet
  • USB
  • RS-232
  • RS-485
  • Option:
  • GPIB
  • Analog

Applications

  • Home Appliance
  • Laboratory/Certification Bureau
  • Industrial Power Supply
  • Motor & Compressor
  • IT/SMT Production Line
  • Renewable Energy
  • Electric Vehicles
  • Transportation

Programmable Simulations: Transient Feature

Through the Transient feature, user can have more control over the waveform by inserting disturbance at user-defined locations with user-defined drop/rise range. This is a useful feature to simulate different precompliance tests and various types of power line disturbance, such as surge, sag, spike and dropout, for immunity tests.

Ideal for High Inrush Current EUT & Start / End Angle Setting

For switching supply (rectified load), AFV-P-600 and AFV-P-1250 provide standard inrush current as 4.5 times of max. output current, and optional 9 times of max. output current is also available as option, which make AFV-P series the lowest capacity in the market that can achieve the highest inrush current. The user doesn’t have to buy high capacity power supply just in keeping with the high inrush current characteristic of the load. Reduce the costs and save the space.

Capable of sustaining high start inrush current generated by motor or compressor.

The AFV-P series can provide up to 4.5 times of peak current from its maximum rated current, which is ideal for inrush current test, such as electric motor test. Additionally, the AFV-P series allows user to set the start angle/end angle for the product output, which is suitable for testing switching power supplies.

Intuitive Touch Screen Control

To create a complex sequence on the HMI is no longer a difficult task for AFV-P series. The 5 inches touch screen provides users a clear display and an easy set up. AFV-P is also equipped with a rotary knob for better fine tune adjustments.

Multiple Communication Interfaces & Control Software

The AFV-P series is equipped with communication interfaces of USB, Ethernet, RS232, and RS485, so users no longer need to spend extra on remote interface card. Only GPIB and analog are optional interfaces. AFV-P also provides control software with comprehensive programming features and LabView driver, which help users to easily control the AC source without further needs of programming.

Programmable Simulation: Step & Ramp Features

Ramp and Step feature allows users to define slew rate of voltage and frequency at each Step. Users can set the rise/fall time, time unit and voltage/frequency change between Steps to create a wide range of waveform. Additionally, Ramp feature can effectively reduce the inrush current by simulating soft start for motor or compressor startup.

AC & DC Output

AFV-P series not only provide AC output to simulate real world grid conditions, but also can generate DC output based on user's settings. It is an ideal cost-effective power testing solution for R&D and certification laboratories.

AC & DC Output

AFV-P series has the industry leading power density and rackmount type design for easy system integration. 2500VA only comes in 2U and 5000VA is only in 4U.

Fast Response & High Stability

AFV-P series is a high performance AC source with fast response time, low total harmonic distortion and tight voltage regulation. With its technically advanced features, users can easily simulate power line disturbance, such as sags, surges, dropouts and spikes.

Screen Lock Password

In order to prevent the operator from changing the set parameters by mistake, the new Screen Lock Password function is added on AFV-P series, so that the operator can only perform the output of the device, and only authorized personnel has the password to unlock the screen and edit parameters.

High Voltage Output 620V/1240V (Option)

AFV-P series provides optional high-voltage output 620V or 1240V to meet the high voltage requirements on simulations of wide input voltage variations (15%~20%), over-voltage and other extreme conditions. For example, it can simulate US 277V with at least 15%

LED TRIAC Dimmer (Option)

AFV-P series provides optional LED TRIAC Dimmer function, which can simulate output of TRIAC dimmer. The user can select whether to perform LEADING EDGE DIMMING or TRAILING EDGE DIMMING via HMI. Compared with traditional TRIAC dimming, the output waveform can be controlled more accurately and effectively.

Shortcuts of Output Memory Set (Basic Mode)

1. One user-assigned shortcut from 50 memory sets
2. Three fixed shortcuts from first three memory sets

AFV-P series can display 4 shortcuts of Memory Sets in BASIC Mode, and the voltage and frequency setting of each Memory Sets can be clearly read. The user can quickly switch the output by selecting the shortcuts. Also, the Screen Lock function is also provided for preventing operators from acciden

Panel Description

1. Power Switch
2. Touch Screen HMI
3. Rotary Knob
4. Output / Reset
5. AC Output Socket
6. Output Terminals
7. Remote Sense
8. USB Interface
9. RS-232 / RS-48
10. Ethernet Interface
11. Input Voltage Selector
12. PLC Remote In/Out
13. Input Socket
14. USB Interface
15. Sync. Singal I/O

Models

AFV-P Series Single-Phase Output (600VA - 5kVA)

ModelDescription
AFV-P-600A High Performance Programmable AC Power Source (600VA/310VAC/15-1000Hz)
AFV-P-1250A High Performance Programmable AC Power Source (1250VA/310VAC/15-1000Hz)
AFV-P-2500A High Performance Programmable AC Power Source (2500VA/310VAC/15-1000Hz)
AFV-P-5000A High Performance Programmable AC Power Source (5000VA/310VAC/15-1000Hz)
AFV-P-600B High Performance Programmable AC Power Source (600VA/310VAC/40-500Hz)
AFV-P-1250B High Performance Programmable AC Power Source (1250VA/310VAC/40-500Hz)
AFV-P-2500B High Performance Programmable AC Power Source (2500VA/310VAC/40-500Hz)
AFV-P-5000B High Performance Programmable AC Power Source (5000VA/310VAC/40-500Hz)
AFV-P-T620A 620V Transformer Box (AFV-P-600 & AFV-P-1250)
AFV-P-T620B 620V Transformer Box (AFV-P-2500)
AFV-P-T620C 620V Transformer Box (AFV-P-5000)
AFV-P-T1240A 1240V Transformer Box (AFV-P-600 & AFV-P-1250)
AFV-P-T1240B 1240V Transformer Box (AFV-P-2500)
AFV-P-T1240C 1240V Transformer Box (AFV-P-5000)
AFV-P-001 RS-232/RS-485/USB/Ethernet Interface
AFV-P-002 GPIB Interface
AFV-P-003 Analog Control Interface
AFV-P-004 RS232 Cable (1.8m / Female to Male)
AFV-P-008 Input Power Cable 1.8M (for 600VA)
AFV-P-009 Input Power Cable 3M (for 1.25kVA/2.5kVA)
AFV-P-010 Input Power Cable 5M (for 5kVA)
AFV-P-011 Input 400Hz (at input 110V/220V ±10%)
AFV-P-012 Output 320V (at input 110V/220V ±10%)
AFV-P-013 LED TRIAC Dimmer Simulation
AFV-P-014 Output 9 times of Inrush Current (AFV-P-600 & AFV-P-1250)

Only at Rexgear

Technical Support

Cut off current at a certain voltage?

Customized Equipment

Phase angle? Overload capacity?

Short Lead Time

On special orders & custom made power supplies.

Dedicated Engineer

Helping you select the ideal hardware & software with confidence.

Preen Authorized Distributor

When choosing an industrial equipment, It is essential to work with experts who have had actual experience installing, using, and repairing them. This puts us in the top 2% of the authorized distributors and service providers. We deliver custom/special order Preen power supply while maintaining the original warranty.